- HVAC Systems
- A/C Units
- Heat Pumps
- Air Handlers
- Water Heaters
- HVAC & R Tools
Make a difference. Help those affected by Hurricane Irma, Hurricane Harvey and the California Wildfires by donating today.
Noritz is proud to introduce our most efficient tankless heaters, the next generation in tankless technology - condensing heaters. This innovation utilizes a dual heat exchanger, a fusion of stainless steel and copper heat exchangers. The 100% stainless steel component captures the residual heat from the exhaust temperature to preheat the incoming water before it runs through the main copper heat exchanger. This results in dramatic reduction of carbon dioxide and increases the heater's efficiency level to over 93%! Another benefit of this technology is lower exhaust temperatures, which means less costly PVC can be used for its venting. Please note that this unit must be mounted indoors and has a twin pipe direct vent configuration. A PVC adapter is built into the heater for easy installation.
It's the coolest and greenest tankless water heater available today! This is the highest performing condensing unit on the market today. Some other brand(s) may have a bit higher efficiency rating, but there is a fine balance between the efficiency level and flow rate performance. At Noritz we strive to maximize efficiency levels without sacrifing the hot water output, temperature fluctuations, and water pressure. Comfort and safety is something we do not compromise on.
Built-in features include safety lock-out, freeze protection, and high elevation adjustment. These units also offer several innovations:
ATTENTION!!! 3" or 4" PVC venting can only be used on condensing heaters (PVC adapter is built-in).
Noritz prides itself on being the best tankless water heater manufacturer to supply all of your commercial hot water needs. To determine which tankless water heater model is right for you, you first need to identify your peak hot water usage. The estimation chart shown can guide you to find the right sized commercial tankless hot water heater for your commercial building. Please note that this unit must be mounted indoors and has a twin pipe direct vent configuration.
Each showerhead illustrated above is about 2 GPM, which is roughly what a standard showerhead, bathroom sink, dishwasher, and washing machine would use. To meet all commercial hot water heater needs, these tankless hot water heaters can be linked together to provide on-demand hot water for every application. The number of showerheads next to each series shows the heater’s capacity of providing hot water simultaneously.
PLEASE NOTE: The chart is for ESTIMATION ONLY. Before installation, have a registered plumber size the application according to Noritz Specification Sheets to ensure the model can accommodate your hot water needs.
Approvals - CSA, UPC**, NSF, Low NOx Approved by SCAQMD [<14ng/J or 20ppm], This product complies with California AB 1953 Low Lead Law. Suitable for Installation in a Manufactured (Mobile) Home.
|Manufacturer Part Number||NRC1111-DV-NG|
|Professional Installation Required||Yes|
|Dimensions (W x H x D)(inches)||18.3" (464mm) x 24.2" (615mm) x 9.4" (240mm)|
|Shipping Weight (LBS)||68 lbs.|
|Condensing or Non Condensing||Condensing|
|Temperature Control Included||Yes|
|Mounting Location||Indoor Wall Mounted|
|Residential or Commercial||Residential|
|Fuel Source (Factory Default)||Natural Gas|
|Gas Burn Rate Min/Max (BTU)||16,000 - 199,900|
|Thermal Efficiency||Fully condensing, 93% efficient for use with natural gas or propane|
|Hot Water Capacity Range Min/Max (GPM)||0.5-11.1 GPM (2-42 L/min.)|
|GPM @ 30° water temp rise(southern climates)||11.1|
|GPM @ 70° water temp rise(southern climates)||5.3|
|Factory Pre-set Temperature (°F)||120°F|
|Water Temperature Range (°F) (no remote/standard remote)||100 - 140°F (In 5°F intervals) (9 Options) with included remote (RC-7651M)|
|Direct Vent Only||The DV model can also be converted to a non-direct vent (SV) model with the use of a Conversion Kit (#SV-CK-3)|
|Vent Type Description||Direct Vent|
|Max Vent Distance||62' with 3" or 4" PVC or CPVC piping. ATTENTION!!! 3" or 4" PVC venting can only be used on condensing heaters (PVC adapter is built-in).|
|Fuel Source Pipe Diameter Required||3/4" NPT|
|Fuel Source Connection Size||3/4" NPT|
|Min/Max Fuel Source Pressure (WC)||4" - 10.5" W.C.|
|Water Pressure Required (PSI)||15-150 psi|
|Cold Water Inlet Connection||3/4" NPT|
|Hot Water Outlet Connection||3/4" NPT|
|Electical Hookup||120VAC (60Hz)|
|Anti Frost Protection||223W|
|Number of Heat Exchangers||2|
|Heat Exchanger Material||Manufactured with commercial grade copper, 25% thicker piping than standard models|
|Multiple Units Can Be Linked With Optional Components||Yes|
|Warranty Heat Exchanger (years)||12|
|Warranty Parts (years)||5|
|Use in Manufactured Homes||Yes|
|Included Accessories||Anchoring Screws, RC-7651 Remote Controller, Remote Controller Cord|
This item is shipped fully insured via a package delivery service such as UPS, FedEx, or USPS based on your
location and cost.
Ground package delivery service transit times are based on the state and zip code locations which may take 1 to 7 days.
We can not ship to a P.O. Box regardless of the carrier chosen.
All order shipments receive E-mails with tracking information when the item is in transit.
Please be aware that high value items will have a signature required at the time of delivery because of insurance value.
To calculate the shipping cost of an item, please place that item in the shopping cart and provide your state and zip code information.